starlight pro

starlight pro Polymerisationslampe

 

A cordless LED curing lamp for flexible use that can be taken from one room to the other. Thanks to its high performance level and the long-lasting lithium-ion battery, it will run for 320 cycles of 10 seconds each in succession and recharging takes only 120 minutes. Its output can be checked thanks to the built-in radiometer. starlight pro can be relied on to harden a 2-mm thick layer in only 10 seconds and is extremely light (only 105 g). It provides a choice between two operating modes: “Fast-Curing” and “Slow Rise” (soft start).

starlight pro - white, shiny

  • starlight pro handpiece
  • starlight pro charger
  • 8 mm optical fiber, black with metal click-clack connection
  • optical protection

starlight pro - yellow, shiny

  • starlight pro handpiece
  • starlight pro charger
  • 8 mm optical fiber, black with metal click-clack connection
  • optical protection

starlight pro - silver

  • starlight pro handpiece
  • starlight pro charger
  • 8 mm optical fiber, black with metal click-clack connection
  • optical protection

starlight pro - black, matt carbon fiber optic

  • starlight pro handpiece
  • starlight pro charger
  • 8 mm optical fiber, black with metal click-clack connection
  • optical protection

Download

LIGHT SPECTRUM

starlight lamps are effective on camphoroquinone, used as photoinitiator in 98% of the materials on the market. They emit light on a wave-length comprised between 440 nm and 480 nm with a peak at 460 nm.

camphoroquinone absorption spectrum

OPERATING MODES

  • „Fast“ mode: 10 seconds at maximum light intensity, with acoustic signal at the beginning and at the end of the cycle
  • „Slow rise“ mode: 20 seconds with a progressive increase of the light intensity reaching the peak within the first 3 seconds, one acoustic signal after 10 seconds and one at the end of the cycle

graph starlight pro operating modes

technical advantages

OPTICAL FIBRE

sterilizable, coherent, fibre optics conductor, Ø 8 mm

CLICK-CLACK CONNECTION

exclusive connection in metal ensures an optimal light beam transmission

OPTICAL PROTECTION

sterilizable, simple to apply to the optical fibre

LOW TEMPERATURE

it does not require a fan as it develops no heat – silent

 

HYGIENE

the smooth, continuous and compact surface enables perfect disinfection

 

PROCESSOR CONTROL

constant light power regardless the charge level

 

LOW BATTERY WARNING

the double acoustic signal is activated when the battery is still sufficient for 6 cycles

CHARGING STATION

  • green control LEDs indicating mains supply and signalling consent for charging process and power output
  • in case of problems a yellow LED will flash

 

 

 

RADIOMETER

  • integrated radiometer which checks the power output
  • result indicated by a LED

 

 

 

ACCUMULATOR

lithium-ion battery with no memory effect

 

CHARGING TIME

only 90 minutes

 

CAPACITY

320 cycles with 10 seconds

Technical specifications

Device compliant to Dir. 93/42/CEE: Class I
Classification as per EN 60601-1:

II
Type B
IP 20 (recharging unit)
IP 22 (handpiece)

Power supply voltage: recharging unit: 100-230 Vac 50/60 Hz 15 VA
handpiece: lithium-ion battery, 3.7 V 1100 mAh
Charging time:About 2 hours
Device for intermittent operation: 120 sec ON 40 sec OFF Max 3 times running
Light source:High-luminosity LED with optics  
Class 2 M (IEC 60825-1) LEDs  
Dominant wavelength: 440 - 465 nm  
LED light emission: > 1.400 mW/cm2  
Average life: 1,800,000 cycles, 20 seconds each
Optical fiber:

Diameter 8 mm
Composition: Drawn coherent fibers surfused in transparent quartz  
Autoclave sterilizable (max. temp. 135°C for 20 minutes - max. 500 cycles).

Exposure:Fast: Exposure time 10 seconds - Acoustic signals indicating start and end of exposure  
Slow rise: Exposure time 20 seconds - Acoustic signal at the start, after 10 seconds and at the end of the 20 seconds  
The cycles can be stopped or repeated at any time
Operating conditions:from +10°C to +35°C
Relative humidity from 45% to 85%
Pressure of air P: 800hPa/1060hPa
Transport and storage conditions: from -20°C to +40°C
Relative humidity from 45% to 85%
Pressure of air P: 500hPa/1060hPa
Weights and sizesRecharging unit: Weight 555 g
L - W - H 96 x 120 x 58 mm  
Starlight pro handpiece: Weight 105 g
 L 198 mm, max. Ø 23 mm
Warrantydevice 3 years