- steel body with black selection panel
- black optical fiber
Standard program per 10 sec
starlight s sler® - built-in version for a better curing result
sler® stands for „soft light energy release”, a slow decrease of light intensity at the end of the cycle. This patented mectron technology modulates and controls the temperature and shrinkage of the composite, improving its mechanical properties.
starlight s sler® - built-in version for flexible use
Polymerization with more than 1.400 mW/cm2. The starlight s sler® can be easily built into a dental unit. All the high tech electronics of starlight sler® are integrated in just its handpiece. Easy installation on your dental unit: only power supply and control are needed. The ergonomic handpiece can be positioned simply in the quiver (its holder). starlight s sler® is equipped with 6 different operating modes.
Temperature and shrinkage exhibit an inverse relation. Interrupting light exposure stops the energy supply but the curing process is ongoing.
Compared to a standard curing cycle, the sler® technology shows a better thermal control of the curing process. This protects against interface debonding, which may lead to marginal leakage.
The sler® technology allows the dental material to relax its shrinkage stress at the end of the curing cycle. This decreases the possibility of micro-fractures both in the composite material and in the dentine substrate.
Composite materials cured with sler® technology show improved mechanical strength, which contributes to better clinical performances.
|Device compliant to Dir. 93/42/CEE:||Class IIa|
|Classification as per EN 60601-1:|
|Power supply voltage:||24 Vac 50/60 HZ |
33 Vdc supply double insulation
|Max. power absorbed:||9W|
|Fuses||315 mA T (Not included in the mectron supply)|
|Device for intermittent operation:||120 sec ON 40 sec OFF|
|Light source:||High-luminosity LED with optics |
Dominant wavelength: 440 - 465 nm
LED light emission: > 1.400 mW/cm2
Average life: 1,800,000 cycles, 20 seconds each
Diameter 8 mm
|Exposure:||SLER: Exposure time 10/20 sec, SLER function at cycle end |
SLER+: Exposure time 11/21 sec, gradual increase during first 2 sec, SLER function at cycle end
SOFT: Exposure time 10/20 sec, light emission at 70% of maximum power
Possibility of cycle interruption or repetition at all times
|Operating conditions:||from +10°C to +40°C|
Relative humidity from 30% to 75%
Pressure of air P: 800hPa/1060hPa
|Transport and storage conditions:||from -10°C to +70°C|
Relative humidity from 10% to 90%
Pressure of air P: 500hPa/1060hPa
|Weights and sizes||122 g |
L 141 mm, max. Ø 25 mm
|Warranty||device 3 years|